AdelaideCollectiveThe magnetic display system
Your card stays protected inside its supplied 35pt magnetic case, while four precisely positioned magnets hold it over the artwork to complete the scene.
Built differently
Magnets are serious. That is why we do not rely on peel-and-stick adhesive pads. Each magnet is positioned by hand and bonded directly to the 35pt case using UV-cured resin.
Four 20 mm × 1.5 mm N42 neodymium magnets are aligned to the concealed locating points behind the artwork. Each magnet is rated to 2 kg of pull power.
UV resin cures into a hard, permanent bond between the case and the magnet. Unlike self-adhesive magnets, it is not reliant on a sticky pad that can soften, shift or lift in extreme heat.
N42 magnets provide an extremely strong hold, while a tiny amount of controlled movement lets you gently position the protected card for the most accurate alignment.
From case to completed mount
Every case is prepared, measured and finished by hand.
The card is placed in its penny sleeve and seated inside the supplied 35pt case.
Four fixing positions are carefully set so the case meets the artwork centrally and evenly.
Each magnet is secured to the case with UV-cured resin, creating a rigid connection without adhesive pads.
The finished four-point layout holds securely while preserving the tiny adjustment needed to align a real, print-cut card.
Fitting, removal & care
A printed care guide is included with every order. Please read it before attaching the case and retain it for future reference.
Place it face-up on a clean, soft and stable surface.
Keep the card case supported securely with both hands.
Move slowly and never allow the case to snap onto the glass.
Move slowly and never allow the case to snap onto the glass.
Place it face-up on a clean, soft and stable surface.
Keep the card case supported securely with both hands.
Move slowly and never allow the case to snap onto the glass.
Important safety & care
Adult setup only. This product contains strong magnets and is not a toy.
Swallowed magnets are a medical emergency. Seek immediate medical help.
Inspect before use. Stop using the display if any part is loose or damaged.
Protect medical devices. Keep away from implanted medical devices and magnet-sensitive equipment.
Display indoors. Keep dry and away from heat, humidity and direct sunlight.
Clean gently. Use a clean, dry microfibre cloth.